Rhinoceros 3D v.4 sr5 multilang CZ iso



Hardware:
* Pentium, Celeron, or higher processor.
* 200 MB disk space.
* 512 MB RAM. 1 GB or more is recommended.
* OpenGL graphic card recommended.
* IntelliMouse recommended.
* 3-D digitizer optional.
* 3-D printer optional.

Operating systems:
* Rhino 4.0 runs only on Windows 2000, XP Pro, XP Home, and Vista* including an Intel Mac with



Rhinoceros je silným nástrojem pro 3D modelování a koncepční design. K reprezentaci dokonale hladkých křivek a ploch je využívána NURBS geometrie.
NURBS (NonUniform Racional B-Splines) je matematická reprezentace 3D geometrie, která umožňuje přesně popsat jakýkoliv tvar od jednoduché 2D čáry, oblouku, kružnice nebo křivky až po nejsložitější 3D plochy a tělesa organických tvarů. Díky jejich flexibilitě a přesnosti můžete používat NURBS modely v libovolném procesu od ilustrace po animaci nebo sériovou výrobu.
Můžete začít se skicou, výkresem, výrobkem nebo jen s pouhou myšlenkou?Rhino vám poskytne nástroje, které vám umožní přesně zhotovit váš model a připravit ho pro výpočet obrázků, animaci, tvorbu výkresů, rapid prototyping, analýzu a výrobu.
Rhino má jednoduché rozhraní, které se naučíte snadno ovládat, že se můžete zaměřit na modelování a vizualizaci bez toho, že byste byli omezování softwarem.


Homepage:



Info a tutorial:



Download 3x200Mb + 1x92Mb :


Bez hesla

Keygen + SR5:



V-Ray pro Rhino4


Download 24Mb:



Flamingo v.2.0 plugin pro Rhino

Flamingo je renderovací modul pro Rhinoceros. Uživatelům Rhina přináší technologii radiozity a raytracigu, převzatou z programu Accurender, vyvíjeným rovněž firmou McNeel & Associates.

Download 88Mb:



Penguin 2 pro Rhino ( CZ )


Download 10Mb:




Brazil 2 beta pro Rhino



HomePage:


Download 13Mb:



Bongo animation in Rhino
Profesionální nástroj na animace pro Rhino



Download 11Mb:


Instalace:
Nainstalujete Bongo , pak spustite patch. Jenze ten neni dokonali , ale jediny dostupny ( teda nic jineho sem nenasel) Pro upravu musite do registru. Takze menu START /spustit / napisete regedit a zmacknete OK. Otevre se Editor registru.


Otevrete si to jak je to na obrazku /HKEY-LOCAL-MACHINE/SOFTWARE/ a sjedte dule na /McNeel/Bongo/ a klepnete na /Version 1.0/ Obevy se vedle v tabulce informace jako na obrazku.


No a tady je to spatne odkazuje to na adresu D:\Archivos de programa\Bongo 1.0 coz je blbost. Me se Bongo nainstalovalo do C:\Program Files\ takze poklepete na tlacitko /InstallPach/ (pred tim radkem) a do okynka zadate adresu kde mate bongo nainstalovane.


Pak zmacknete OK pro potvrzeni zmeny a zavrete editor registru. A tet muzete zapnout Rhino.
Me to jede.


Na nic lepsiho sem neprisel AHOJ

Rhinoceros update na SR6



Co je nového, SR6 (9-Jul-2009)
Vylepšené funkce:

* Block: A warning about blocks with no geometry as been added.
* Open: A confirmation message now appears on the command line.
* Save:STL - Interface change: The options and prompts for a scripted export of file formats that use the STL mesh setting have been changed to more closely resemble the settings of the Mesh command.

Opravy chyb:

* BlockManager: Hidden blocks (with * prefix in the name) did not display correctly. This is fixed.
* BooleanUnion crash fixed.
* BoxEdit crash fixed.
* Circle crash fixed.
* Circle crash fixed.
* Close Rhino crash has been fixed.
* CopyViewportToDetail faieds after the first time the command is run. This is fixed.
* Dim: The hyphen between feet and inches sometimes did not display. This is fixed.
* DimAngle crash fixed.
* DocumentProperties, Render: The Lock viewport aspect ration was incorrectly not maintained after closing the dialog box. This is fixed.
* EdgeSrf crash fixed.
* EditPtOn crash fixed.
* ExtrudeSrfTapered: Failure bug fixed.
* Flow command crash fixed.
* Insert: A problem with creating layers after the insertion was canceled has been fixed.
* Installer: A file required for ZPR export was not being installed. This is fixed.
* Installers: Level I and Level II Training Guides now have installers.
* InterpCrvOnSrf command crash fixed.
* InterpCrvOnSrf crash fixed.
* Intersect crash fixed.
* Linetypes: The Document Properties Linetype scale incorrectly allowed 0 as a value. This disabled linetypes. This is fixed.
* Loft command crash fixed.
* Loft crash fixed.
* Loft crash fixed.
* Loft crash fixed.
* Loft crash fixed.
* Loft: Several bugs that caused an incorrect surface have been fixed.
* MacroEditor: A problem with focus to the command line has been fixed.
* Offset crash fixed.
* OffsetSrf crash fixed.
* OffsetSrf crash fixed.
* Open:DWG/DXF: A problem opening DXF files has been fixed.
* Open:DWG: Splines did not read properly. This is fixed.
* Open:IGES crash fixed.
* Open:OBJ: Files imported from topmod3D had some gaps. This is fixed.
* Open:OBJ: OBJ data was not read correctly by Service Release 5b. This is fixed.
* Open:SKP: An import error has been fixed.
* Open:SolidWorks crash fixed.
* Open:STEP opravena padací chyba.
* Opraveno padání příkazu Otevřít.
* Options, Appearance: The Full path in titlebar option did not work properly. This is fixed.
* Options, Appearance, Advanced Settings: The Export button was incorrectly available even when no scheme is selected for export. This is fixed.
* PanelingTools: Several crashes fixed.
* Panelling Tools: Crash fixed.
* Patch crash fixed.
* PointDeviation: tlačítko Apply nepracovalo správně. To bylo opraveno.
* Polygon crash fixed.
* Polygon crash fixed.
* Opraveno zhroucení v příkazu LomenáČára.
* Print crash fixed.
* Properties: opraveno padání oddílu Text.
* Rectangle crash fixed.
* Opraveno padání příkazu Reparametrizovat.
* RhinoScript: The RhinoScript page of Options incorrectly allowed the same script file to be added more than once to the list of files to load at startup.
* Save:3DS: A problem with importing and exporting has been fixed.
* Save:DWG/DXF: Support for exporting ACIS solids has been added. Create or edit a named export scheme, and change the export option for Rhino surfaces to AutoCAD Solids.
* UložitJako - opraveno padání.
* Scale1D neaktualizoval správně barvy CurvatureAnalysis. To bylo opraveno.
* ScaleEdge crash fixed.
* SelBlockInstanceNamed crash fixed.
* ShortCurves plugin crash fixed.
* Starting Rhino on Vista Improved: previous releases of Rhino 4.0 sometimes would only start when run as Administrator. SR6 should start without administrator permissions.
* Toolbar: Graphic images were garbled when toolbar was imported. This is fixed.
* TriangulateNonPlanarQuads: A problem with the selection calculation has been fixed.

Download: 65Mb



Bez hesla

Instalace: